A Guide to Smoke Detector Installation and Maintenance

Smoke detectors are one of your first defenses to stay safe from fire and reduce damage. When properly installed and maintained, they can alert you to trouble at the first whiff of smoke and reduce the risk of death by half.1

Below, we share our tips for safely selecting, maintaining, and installing these handy safety devices.



1. Research and pick your smoke detectors

If your current detectors are more than 10 years old—or if your home doesn’t have detectors at all—invest in new ones right away.

Before you make a purchase, conduct some research about the different types of smoke sensor alarms. There are a variety of brands, models, and price points that are available so you can pick the detector that best meets your safety needs and budget.

2. Purchase detectors for every level of your home

Your house’s layout will determine how many detectors you need, but at a minimum you should install one on each level of the home, with at least one inside each bedroom and one outside of every sleeping space. As you’re tallying up the number of devices you need, don’t forget to count basement and attics as separate levels.

3. Promptly install your alarms in central locations

Install your smoke alarms as soon as possible—you don’t want to be spending any nights without the detectors’ protection. 

Smoke detector installation

A workman performs regular maintenance on a smoke alarm.

Place each alarm on a flat stretch of wall or ceiling, roughly in the center of the room. For wall-placed devices, make sure that the detectors are about 12 inches or fewer from the ceiling.2 Here are some tips on where you should install your smoke detectors.

Read and follow your device’s instructions carefully when performing the installation, especially if the detectors require hardwired power. If you are nervous about the setup process, find a professional to install the alarms for you.


Video: How to prevent false smoke detector alarms

Play Video

Subscribe to our YouTube channel for more videos like this one! Learn how to protect your home, your loved ones, yourself, and your belongings.


4. Test your smoke alarms immediately after smoke detector installation

Once you have installed the smoke alarms, test the detectors out with everyone in the home. Press the test button on each device individually, ensuring that every person can easily recognize the sound of the alarm. This initial test is also a great time to discuss your home evacuation plan, along with routes and outside meeting points. The U.S. Fire Administration outlines a variety of exercises to add to your fire drill so that each family member is prepared and has a greater chance of getting out unharmed if a fire ever breaks out.

5. Perform power tests monthly

Though some smart detectors are self-testing, it’s generally a good idea to manually test your detectors at least once per month. To run a test, push the smoke detector’s test button, verifying that the sensor is operational and the alarm sounds at the optimal volume. If you have fire alarms in areas of your home you can’t easily reach, take precautions when climbing up to test them. Use a sturdy stepladder—never a chair—and perform these tasks while another family member is home.

6. Replace non-hardwired detectors’ batteries annually

If your detector runs on batteries, don’t wait until you find the batteries dead to change them out. Instead, set an annual battery replacement date on a special occasion—the first day of summer or Memorial Day, for example. Picking a well-known date will help you remember the task. Always refer to the manufacturer’s guide and follow the instructions when replacing your smoke alarm’s batteries.

7. Thoroughly clean your detectors at least once per year

Dust and pollutants can impede fire alarm performance, so try to keep your detectors clean. An occasional light dusting with a dry rag should easily remove any exterior dust, but you’ll also want to perform deeper cleans annually.

To do a thorough cleaning, take the device off of the wall or ceiling, remove the power source, and then gently take off the external casing. Carefully clear out any collected dust using a vacuum attachment, a compressed air can, or a dry cloth—avoiding liquid sprays or cleaners. Once all dust is gone, you can reassemble the detector and place it back on the wall or ceiling.

Final word

Fire safety is a vital component of a homeowner’s responsibility. Hopefully you’ll never experience a house fire, but it’s a good idea to be prepared. Follow the steps above to help ensure that your home is as safe as possible, and check out our recommendations for the Best fire and smoke alarms.

Celeste Tholen
Written by
Celeste Tholen
Celeste has dedicated her decade-long career to reporting and reviews that help people make well-informed decisions. She oversees editorial strategy and production for SafeWise, with a goal to help everyone find the information they need to make their homes and lives safer. Prior to SafeWise, she worked as an editor and reporter for KSL and Deseret News. She holds a Bachelor's degree in Journalism. In her free time, she volunteers at the local botanical garden and writers for the community newspaper.

Recent Articles

senior man walking by the ocean
Best Medical Alert Systems with GPS
Philips Lifeline sports five types of locating technologies in one wearable device. Learn more about...
telus-security-platform-on-phone
The Best Home Security Systems in Canada
Find the best home alarm system to protect your house. We looked at price, features,...
Senior woman hugging dog
8 Best Medical Alert Systems of 2022
See which medical alert system is the best to keep you and your loved one...
diy-security-system-on-ipad
Best DIY Home Security Systems of 2022
DIY install home security systems are cost-efficient, effective, and easy to install. See which DIY...